KNXiQ
Main features
• VAV damper for pressure independent flow regulation.
• Designed for KNX systems
• Quick and easy installation
• Available in both circular and rectangular version
Description
• KNXiQ is a versatile VAV-damper designed for energy-saving purposes and used to control air volumes in e.g. schools, shops, offices and conference rooms.
• The unit is designed to regulate constant or variable air volumes with simultaneous measurement of the current flow, but can also be used for presure regulation in ducts.
• The product is primarily used in demand-controlled solutions, connected to a BMS using KNX as communication protocol.
• Products are delivered with pre-assigned network addresses. This, combined with the automatic device identification in the KNX protocol, enables quick and easy installation and commissioning.
• The unit comes fitted with actuator with integrated regulator from Siemens.
Material options and finishes:
• Galvanized sheet steel (standard)
• Powder coated finish.
Circular sizes (mm):
Ø100 / Ø125 / Ø160 / Ø200 / Ø250 / Ø315 / Ø400 / Ø500 / Ø630
Rectangular sizes:
Products in rectangular version are supplied in specific steps within a standard span of W x H dimensions. starting from from 200 x 100 mm (min) to 1600 x 700 mm (max). See product sheet for the specific combinations.
Alternative dimensions can be offered on special order.+AJ7
• Product in standard version comes with housing and blade of galvanized sheet steel, measuring rod of aluminium and measuring hoses of silicone rubber.
• The products meet corrosivity class C3 and pressure class A with a housing in density class C.
Circular products
• Circular products are fitted with damper blades in tightness class 4 unless otherwise specified.
• Circular products are fitted with gaskets of EPDM rubber.
Rectangular products
• Rectangular products are fitted with opposing damper blades in tightness class 3 unless otherwise specified. Blade gaskets are of silicone rubber and damper shafts of galvanized steel.
• Rectangular products are equipped with joint flange profiles for D-type (Drive) or rectangular joint slide profiles/rail. Rails and sealing are not included.
• Circular products have nipple dimensions with rubber gaskets and are mounted with a sliding muff (female slide-in coupling).
• Circular products can be installed in any position and require no maintenance.
• Rectangular products are based on the ordered WxH measurements, which must be taken into account when mounting.
• Rectangular products in standard version come with joint flange profiles for D-type (Drive) or rectangular joint slide profiles/rale. Rales and sealing are not included.
• Rectangular products can also come with frame profiles for bolted assembly (must be specified when ordering).
• In order for the product to provide sufficient measuring accuracy, a straight section of duct must be maintained before the product in air flow direction. This must be taken into account when mounting, see the products operation and maintenance documentation for specific requirements.
• The products are not intended for use in cold or aggressive environments.
• The products may only be installed by authorized personnel. All
rules and regulations issued by authorities in the country of usage
must be followed during installation.
• All wiring must be done with the power supply disconnected.
• When installing, space should be reserved for access to the device's actuators and/or readability of units equipped with a display.
• Please see the products operation and maintenance documentation for detailed information on mounting, connection and commissioning.