IDK
Main features
• Induction diffuser for installation in circular ducts.
• High induction level reduces temperature gradients.
• Even air distribution simplifies commissioning.
• Can be installed for horizontal and vertical air supply.
• Several surface finishes available.
Description
• Supply air diffuser with high induction for rapid and efficient mixing in premises where heating and/or cooling with air is desired.
• Even distribution of the supply air minimises the need for dampers and attenuators and simplifies commissioning in duct branches with multiple diffusers.
• The high degree of induction results in low temperature gradients and thus increased energy savings.
• The product is suitable for many types of premises and operations, such as warehouses, sports halls, schools and shops.
• On request, the diffuser can also be dimensioned according to the flow requirements of the property, which are then specified when ordering. The diffuser is then flow-adapted during manufacture.
Material och ytbehandling
• Galvaniserad olackerad stålplåt i RAL9006 (standard).
• Pulverlackerad stålplåt i grå RAL9006.
• Pulverlackerad stålplåt i vit RAL9003.
Duct alternatives (mm):
Ø400
Ø500
Ø630
Flow options:
Normal flow – 3 nozzle rows
Normal flow – 4 nozzle rows
High flow – 2 nozzle rows
High flow – 3 nozzle rows
• The product is supplied as standard in unpainted galvanised sheet steel to blend in visually with the surrounding duct system.
• Other colour options:
– Powder-coated steel sheet in RAL9006.
– Powder-coated steel sheet in RAL9003.
• If you require material options for corrosive environments, please contact one of our sales.
• Mounting frame: Galvanised steel sheet.
Delivery form
• The product is delivered including a mounting frame but excluding fasteners for mounting.
Mounting
• The diffuser is mounted along the extension of the circular duct using the mounting frame included in the delivery.
• The diffuser and mounting frame are adapted to the bending radius of the specific duct dimension and should not be mounted on a duct dimension other than that for which it is intended.
• The diffuser can be mounted for both horizontall and verticall dispersion.
• When mounting after a bend/elbow or T-piece, a straight section of duct corresponding to 4 x the duct diameter is required.
• After rectangular hole cutting, first mount the frame and seal it, then mount the diffuser in the frame. Mounting template is included.