TSK-TK
Main features
• Circular slot design for supply air dispersion
• Free-hanging or fixed ceiling installation
• TSK for 4-way dispersion
• TSKE for 1-way dispersion
Description
• Slot type supply air diffuser suitable for most types of premises.
• The diffuser is normally installed with a cleanable commissioning box, type TK, containing commissioning damper and measuring hoses.
• TSK is available in two variants, TSK for 4-way distribution and TSKE for 1-way distribution.
Product sizes – TSK (mm):
Ø100
Ø125
Ø160
Ø200
Ø250
Product sizes – TSKE (mm):
Ø100
Ø125
Ø160
Accessories
• Plenum box with measurement and commissioning damper:
– TK (supply air, cleanable version)
• MN: Duct extension between box and diffuser.
Commissioning box/plenum – TK
(Ø dim. diffuser side-duct side, mm)
• TK – 1 step*):
125-100
160-125
200-160
250-200
*) The term step refers to the size ratio between the box's connection dimensions:
– 1 step = A difference of 1 duct dimension between the box's diffuser side connection and duct side connection, e.g. 160-125.
– 0 step = = No difference between the box's diffuser side connection and duct side connection, e.g. 160-160.
• TSK/TSKE: Powder-coated steel in white RAL 9003 standard color.
• Plenum/Commissioning box: Hot-dip galvanized steel sheet, internally insulated with washable and sound-absorbing material made of 100% recycled, non-allergenic, hydrophobic PET plastic.
• The product is connected directly to the plenum / commissioning box.
• The box inlet is connected to the circular duct.
• Supply air boxes can be mounted directly after a bend. When mounting the box after a T-section, a straight stretch of duct, corresponding 4 x the duct diameter, is required to maintain sufficient measurement accuracy.
• The diffuser is secured into the box socket with pop rivets or self-tapping screws. The front plate is then mounted.
• When installing the 1-way version (TSK1/TSKE) without a box after a 90° bend, the diffuser must be positioned with the sector plate facing the outer radius of the bend.
• The correct air volume is measured using the easily accessible measuring hoses connected to the measuring rod in the box inlet.
• Commissioning of air flow is done by adjusting the damper blade using the cords in the box.
• K-factors are found in the installation and maintenance instruction for the product:
English: "…IM-EN.pdf"
Danish: "…DV-DK.pdf"
Swedish: "…DU-SE.pdf"
Please note: The supplied language versions for product documentation, may vary for each individual product.