CERTiQ-D

Main features

• Controlling subunit damper for variab le air flows in system solutions for laboratories, clean rooms, hospitals, etc.

• Communication via Modbus RTU as standard

• Equipped with high-speed actuators to meet safety standards in laboratory environments

• Delivered as part of uLAB and Uranos system solutions for laboratory and safety ventilation

• The product is supplied in circular and rectangular version

Description

CERTiQ dampers and measuring units are designed for use in laboratory and safety ventilation system solutions from Netavent.

• CERTiQ-D – Rotary/shut-off damper without regulator for laboratory applications.

In combination with the series' other components, the products can be configured to be included in a variety of system solutions.

• Communication via Modbus RTU alt. iQ-net 2.0 as standard (applies to units equipped with a controller).

• The products are supplied as components in laboratory and safety ventilation system, ControlAir uLAB and can also be used in system Uranos from Netavent.


Material options and finishes:
• Galvanized sheet steel (standard)
• Powder coated finish.
• Housing in Magnelis® (up to Ø400 mm for circular version).
• Housing in stainless corrosion resistant steel (up to Ø400 mm for circular version), corrosivity class C5 (EN 1.4404).

Circular sizes (mm):
Ø100 / Ø125 / Ø160 / Ø200 / Ø250 / Ø315 / Ø400 / Ø500 / Ø630

Rectangular sizes:
Products in rectangular version are supplied in specific steps within a standard span of W x H dimensions. starting from from 200 x 100 mm (min) to 1600 x 700 mm (max). See product sheet for the specific combinations.

Alternative dimensions can be offered on special order.


• Products in standard version come with damper housing and blade of galvanized sheet steel, but can also be ordered in  painted versions.

• All products meet corrosivity class C3.

• Dampers in the series meet pressure class A with a house in density class C.

Circular products
• Circular products are fitted with damper blades in tightness class 4 unless otherwise specified.

• Circular products are equipped with gaskets of EPDM rubber.

Rectangular products
• Rectangular products are fitted with opposing damper blades in tightness class 3 unless otherwise specified. Blade gaskets are of silicone rubber and damper shafts of galvanized steel.

• Rectangular products are equipped with  joint flange profiles for D-type (Drive) or rectangular joint slide profiles/rail. Rails and sealing are not included.


• Circular products have nipple dimensions with rubber gaskets and are mounted with a sliding muff (female slide-in coupling).

• Circular products can be installed in any position and require no maintenance.

• Rectangular products are based on the ordered WxH measurements, which must be taken into account when mounting.

• Rectangular products in standard version come with joint flange profiles for D-type (Drive) or rectangular joint slide profiles/rale. Rales and sealing are not included.

• Rectangular products can also come with frame profiles for bolted +AF24+AG24